ATOMSTACK A5 M40 40W Laser Engraving Machine

A year after the release of the atomstack a5 and atomstack a5 pro , its successor has been launched. The "Atomstack A5 M40" is designed to enable semi-professional laser engraving and cutting of wood, acrylic, cardboard, and other materials easier for enthusiasts.



ATOMSTACK A5 M40 - Specs
Product Details

• Features
  - New eye protection design
  - Solid and easy installation structure design
  - Upgraded high-performance fixed-focus laser
  - Wide compatibility
  - Precise scale lines axis
  - Ultra-fine compression laser
  - Integral screw rod
  - New laser with knob

• Specification
  Brand: ATOMSTACK
  Model: A5 M40
  Recommend Print Size: 410*400mm
  Laser power: 40W
  Laser output power: 4.5-5.5W
  Wave Length: 445 ± 5nm
  Engraving accuracy: 0.01mm
  Focusing method: Fixed focus laser, no need to focus
  Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
  Operating software: LaserGRBL, LightBurn
  Input Format: NC, BMP, JPG, PNG, DXF, etc.
  Data transmission method: USB connection
  Input Voltage: AC100-240V, 50/60Hz
  Output Voltage: DC12V, 5A
  Equipment net weight: 3.426kg
  Package weight: 5.072kg
  Equipment size: 570*600*270mm
  Packing size: 620*345*130mm
  Certification: CE FCC RoHS FDA

• Package content
  1* X-axis assembly
  2* Section 57CM
  2* Section 48CM
  1* Control box
  3* Support legs
  1* Goggles
  1* Laser
  1* 24V2A power adapter
  1* Power switch line
  1* USB cable
  If you have the time to work through all of these issues, the A5 M40 is likely one of the finest alternatives on the market. With a little ingenuity, protective devices can also be adapted. As previously said, you should thoroughly educate yourself.
  
  
  
  After resolving this issue, the 570*600*270 mm Laser Master rewards the user with a 410*400 mm work surface. With the software LaserGRBL, materials such as wood, acrylic, or cardboard may be engraved or even sliced on this surface. All that is required is a template in JPG, PNG, or SVG format, and LaserGRBL will do the rest nearly instantly. LaserGRBL is used to engrave wood, cardboard and acrylic.
  
  
  
  The ATOMSTACK A5 M40 is delivered as a partially assembled kit. The new gadget improves on last year's Laser Master in a number of ways. The most significant change is undoubtedly the design itself, since the frame is now rectangular, allowing the Y-axis to operate on two rails at the same time. The A5 M40 reaches a speed of up to 10,000 mm/min when combined with the new motherboard, making it substantially quicker than the competitors.
  
  In addition to increased performance, the new motherboard has new features. The device has new features such as a flame detector and an emergency stop switch, which prove handy for law enforcement officials in preventing fires. Along with the new motherboard, ATOMSTACK has upgraded the A5 M40's power supply to 24V. This permits the gadget to laser continuously for up to 25 hours without harm, according to the manufacturer.
  
  Aside from the frame, the laser diode itself has been upgraded. The new A5 M40 laser module, with a brightness of 5.5 watts, now focuses on a 0.16 x 0.19mm region (the predecessor "only" managed 0.3 x 0.5mm). The new diode, according to ATOMSTACK laser engraver, can penetrate through plywood up to 5mm thick in a single pass. This should make the gadget very appealing to model makers. Its 0.1mm beam radius allows it to penetrate plywood used in a number of hard-to-pierce items, such as through drawings in engineering designs or small circuit boards.
  
  
  
  The ATOMSTACK A5 M40 may also be used for a variety of different tasks thanks to its many modules. Cylinders, for example, can be etched with the atomic stack r3 roller . The gadget can also be controlled without a network connection using the offline controller. Who knows, perhaps ATOMSTACK will release additional supplementary product in the future.